HHOOMAN ELLYOUN
EmailCV
Menu

I revised the plan and sections for the ramp. Open sheet 12

Profile at a glance

I work on structural models and formwork drawings in Vienna. For the ramp on Sheet 12, I revised the plan and sections.

Read CV · Download PDF
3D IFC view of the main building. The ramp runs along its outer connection.
Main buildingIFC4 modelDrag to rotate · Hold to look inside
Explore the ramp
More tools
BIM 360
The slab rises here from the lower landing.
Read sheet 12
Drawing symbols

Find the distance · Answer on sheet 12 · Original section (German)

My role on each project

I revised the formwork drawing for the ramp. On the refurbishment project, I coordinated changes with the design team.

Formwork drawing, detail at the start of the ramp
Ramp plan and sections

I revised the ramp plan and sections. My initials, H.ELL., are in the title block on Sheet 12.

Task and result
Document
Formwork drawing, sheet 12 · foundation and section A–A.
Work carried out
I worked on the formwork drawing.
Result
Section A–A gives the top and underside levels at the foot of the ramp.
Drawing work on sheet 12
Responsibilities
Document
Formwork drawing and IFC model of the ramp.
My role
My initials, H.ELL., appear on Sheet 12. At the foot of the ramp I checked the drawing levels against the IFC model.
Web model
The ramp geometry comes from the IFC model.
Work steps
Example in pictures
Inspect the element
Work sample A / drawing sheet 12

Ramp foundation

M-0246 · lokaler PlanbezugOriginalausschnitt · Bildschirmdarstellung nicht maßstäblich
HOOMAN ELLYOUN / BIM WORKSPACE

BIM technician · Vienna

Structural models and formwork drawings

Tragwerksmodelle, klare Pläne und eigene Werkzeuge. Ein Einblick in meine Arbeit zwischen Revit und Baustelle.

Projekte entdecken
Hooman EllyounBIM-Techniker / Revit-Modellierer
Structural modelling
▧ Structural modelMODELLANSICHTENREVIT / BILDANSICHT
Bereitgestellte isometrische Modellansicht: mehrteiliger Baukörper mit rückgesetztem Dachgeschoss und Rampe
01
IsometricBaukörper · Rücksprünge · Rampenverlauf

Vorschau: Modellbilder · 3D öffnen: isoliertes IFC-Hauptgebäude mit 645 Bauteilen.

Model & drawingRevit · formwork · details

Changes & coordinationDrawing revisions · geometry · feedback

Development & testingDynamo · Python · Revit API

Work sample · ramp foundation

What levels does section A–A show?

Axonometric view of four foundation slabs. Element M-0246 is highlighted in gold.
IFC · foundation slabs

M-0246 · IFC model

The slab at the start of the ramp

The highlighted slab rises from the lower landing. Section A–A shows the top and underside of the slab at that junction.

Start of ramp · section A–A

36 cm vertical distance in the drawing and model

Top −3.04 mBottom −3.40 m

My contribution

Check section A–A

I revised the formwork drawing on Sheet 12 and checked these two levels against the model.

Next work sampleHow does the extension connect to the existing building?

My modelling and drawing work

Two examples from my work: a ramp formwork drawing and drawing coordination for a building extension.

Try the schematic models

2 work samples

Compare models and drawings

PROJECT ATLAS / SELECTED SOURCES

Models and drawings

Choose a model or a drawing to see the source and what I worked on.

STRUCTURE / MODEL REFERENCEHE / 01
ORIGINAL MODELIFC4 / 645 ELEMENTS
PROPERTIES / WORK SAMPLE

The main building

The structural model shows where the ramp changes direction and how the building levels step.

My role / context
I prepared the supplied IFC model for comparison with the drawings.
Scope of review
645 geometric elements. Inspect the selection, categories and IFC levels.
Reference
Model images for reference. Drawing lines are not mapped directly to IFC elements.
Explore the ramp and drawing comparison
Original source Drawing work / comparison Web study
Another ramp · separate drawing example
WORK SAMPLE 01 / HOUSING

Ramp & drawing comparison

Coordinate slopes, turns and connections within one drawing revision.

01 / STARTING POINT

Ramp slab with slope changes, bends and connections to adjacent elements.

02 / MY TASK

Develop and update the formwork drawings. Incorporate revisions from updated construction drawings into the model and drawings.

03 / WORK PERFORMED

Check levels, slab thicknesses and connection zones across the plan and its sections.

04 / CHECKS & COORDINATION

Compare external reinforcement drawings with the formwork geometry. Report discrepancies to the responsible team members.

05 / DOCUMENTED RESULT

The formwork drawing includes a plan view and three sections. This sample documents drafting work. Independent structural design is outside its scope.

Source & context

My drafting initials, H.ELL., appear on the formwork drawing. The 3D diagram illustrates the route of the ramp.

View project details
Existing structure & connection · tasks and process
WORK SAMPLE 02 / URBAN RENOVATION

Existing building and connections

First identify the element, type of drawing and floor. Then coordinate the interfaces.

01 / STARTING POINT

An extension meets existing elements. The base slab, bearings and narrow connection zones must remain clearly identifiable.

02 / MY TASK

I agreed the drawing scope with the team and updated the model and drawings.

03 / WORK PERFORMED

Incorporate new elements and agreed revisions into model and drawings. Treat external reinforcement drawings as a separate technical source.

04 / CHECKS & COORDINATION

I requested the missing reinforcement drawings for the roof-storey stair and the slab between the steel beams.

05 / DOCUMENTED RESULT

The formwork and reinforcement drawings show the connections. The consultant designed the reinforcement. I coordinated the documents with the design team.

Source & context

The drawings cover the foundation slab and ground floor. My reinforcement query concerns the roof-storey stair and slab.

View project details

02 / EXPERIENCE & CV

Experience and qualifications

I now work with Revit in Vienna. My earlier work included BIM modelling, CAD drawings and concrete technology.

Download CV (PDF) Request full application documents
Revit modelling · Vienna
Structural modelling in Revit, formwork drawings and construction details. Comparing drawing revisions and clarifying reinforcement drawing changes with the design team.
Qualifications & languages
Bachelor’s degree in civil engineering. German at B2 level, working knowledge of English, native Persian.
Earlier roles
BIM and CAD drafting
BIM modelling, CAD construction drawings, quantity take-offs and spatial coordination.
CAD drafting and team coordination
CAD drafting and team coordination; formwork and reinforcement drawings, Rhino visualisations.
Concrete technology
Concrete technology and quality control.

Contact

If your team needs help with structural modelling in Revit or formwork drawings, you can email me here. I’d be happy to walk you through my work on the ramp.

Hooman Ellyoun

[email protected]

BIM technician and Revit modeller in Vienna

Write an email LinkedIn

How I review drawing changes

Using two revisions of a reinforcement drawing, I trace a change from the plan to the bar schedule.

How I work: I first check which drawing revision applies to the element. If the model and drawing differ, I discuss the discrepancy with the team and update both once we agree on the change.

I compared two revisions of the same reinforcement drawing. Both were prepared by the structural consultant.

Review the drawing revisionOriginal excerpts, bar marks and checking procedure

Work sample B · external reinforcement drawing

Changes to the bar schedule

Compare the same area in two drawing revisions. The bar callout leads to the old and new entries in the bar bending schedule. This drawing is from a different project than the ramp.

The original excerpts load when you open this section.

Reveal the change

I compared the same detail in two issues of the consultant’s reinforcement drawing: the original issue and revision A.

Aligned base revision
Matching area in revision A

Mark 6 · 5 Ø10/15
Mark 103 · 5 Ø10/15

Bar mark → bar shape → entry in the bar bending schedule

Mark 6: 9 → 4 bars · Ø10 · 3.75 m. New mark 103: 5 bars · Ø10 · 4.50 m.

Original mark / base revision
Same mark / revision A
New mark / revision A

Revision A keeps four bars under mark 6 and lists five longer bars under the new mark 103.

Source, role and limits

I compared the geometry in the consultant’s reinforcement drawings and recorded the differences for coordination.

Both drawing issues show the same location.

The bar schedule lists straight bars. On the original drawing, an adjacent dimension line crosses the bar sketch.

01 · Drawing revision02 · Element / floor03 · Geometry04 · Feedback05 · Update
Independent lab · clashes, 4D and handover

These separate practice models let you check a pipe clash, review a construction sequence and hand over an issue.

IFC / BCF / BIM 360

Hand over an issue

Hand over the element type, floor and unambiguous reference together.

Workflow example · no active CDE connection
Software I use
Revit / Revit Structure · AutoCAD
Project experience: modelling and drawing work.
Solibri · Navisworks · BIM 360 · IFC/BCF
The examples show how I compare model revisions and record issues.
Rhino 3D
Visualisations and tender drawings.
Allplan
I’m learning Allplan.
SOFiSTiK
Parameter reference documented in the add-in test. Independent structural design is unconfirmed.

BIM Studio

Inspect the ramp in the model, read sheet 12 or check element data.

IFC4 · Browser views

Tools I build for Revit

I use wall openings and Revit families to test tools for filtering, dimensioning and checking elements.

View tools and testsOpenings, Revit families and AutoAnnotate
ON THE ORIGINAL MODEL / M-0002

Dimensioning a wall opening

Change the opening in wall M-0002 to see which edges and dimensions move in plan and section.

Open in the shared workspace
Additional IFC query · category & level

IFC / SEPARATE MODEL QUERY

Elements by category and level

An additional filter uses IFC category and floor assignment. Its inputs differ from the original Revit rule “Ebene Grundriss = E03”.

Original graph and web adaptation

The original searches for “Ebene Grundriss” = “E03”, checking instance before type and trimming outer spaces before an exact match. The web version uses category and level from the supplied IFC. It adapts the rule to different data. Eight Python branch tests used a simulated host; the original .dyn graph was not run in Revit here.

IFC / CATEGORY AND LEVELRun in browser
01 / INPUTIFC geometryLoading model …
→
02 / FILTERCategory ∩ levelExact match
→
03 / OUTPUTSelection listNot analysed yet
Lines & output

Loading data. Analysis leaves the original model intact.

Family data from Revit

Four family tests in Revit

Select a family and compare two recorded states.

REVIT → GEOMETRY / SAVED STATE

Loading test states…

Geometry check results

The views show the test states recorded in Revit.

Development & testing

AutoAnnotate

Revit tags and dimensions in controlled steps: analysis, preview and read-back.

  • Native tags and dimensions.
  • Check text and dimension overlaps.
  • Flag missing parameters.

Documented local test: 1 tag and 2 dimensions. Read-back values: 7,250 and 4,735 mm. The RUK value in the log was incomplete; the test is insufficient for technical sign-off.

How the Revit API, Python and MCP fit in

The tool uses C#, WPF and the Revit API. I use Dynamo and Python for rule-based workflows.

Earlier independent AutoAnnotate test · W-001
AutoAnnotate / controlled preview
7,250 mm4,735 mm

Choose a test case. The demo leaves project files untouched.

Independent lab · dimensioning algorithm
Dynamo / existing-structure graphics · web demo
→→

Choose a node or start the sequence.

DRAWING STANDARD

Line weights on the drawing

Review screen colours and output line weights separately. Distinguish visible, hidden and cut edges.

Linework and line weights on this drawing.
0.50 · cut0.20 · hidden0.35 · visible

Project template

A structure for views, drawings and recurring settings, presented here as a working method.

View template

Apply rule-based display before manual overrides. Keep graphics and output traceable.

In the office and on site

The photographs show my workplace and slab reinforcement before the concrete pour.

Person and working environmentModel editing and a look at work on site
Hooman Ellyoun
HOOMAN ELLYOUN / VIENNA

My work in the design team

I work with structural models and formwork drawings. When a connection is unclear in plan, I check the section and discuss the open question with the design team.

I build Revit tools for repetitive tasks, including dimensioning wall openings.

Revit · AutoCADModelling and drawing productionIFC · drawing revisionsREFERENCE AND COMPARISONDynamo · PythonRULE-BASED WORKFLOWS / DEVELOPMENTRevit API · MCPINTEGRATION / DEVELOPMENT AND TESTING

You can inspect the portfolio models in your browser.

HE / HOOMAN ELLYOUN · VIENNA
REVIT / TECHNICAL VIEW

Work sample

Explanatory model

Drag or use arrow keys to rotate. Manual rotation pauses the tour.

Original document (German)

View the drawing and the schematic model separately.

Use the zoom buttons to enlarge the drawing, then drag to pan.